Mountaineer 2WD V6-4.0L VIN K (2007)
Seals and Gaskets: Service and Repair
Extension Housing Gasket
Extension Housing Gasket - Rear Wheel Drive (RWD)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the driveshaft.
3. Support the transmission with a suitable jack.
4. Remove the transmission support insulator nuts.
5. Remove the bolts from the transmission support insulator.
6. Raise the transmission and remove the transmission support insulator.
7. CAUTION: The parking pawl, parking pawl return spring and parking pawl shaft could fall out during removal of the extension
housing.
Remove the extension housing.