Mountaineer 2WD V6-4.0L VIN K (2007)
Using the special tool, press the outboard CV joint until it is loose in the hub.
5. Remove the brake cable retainer screw.
^
To install, tighten to 20 Nm (15 ft. lbs.)
6. Remove and discard the outboard toe link nut and back out the bolt for clearance.
^
To install, tighten to 350 Nm (259 ft. lbs.) at curb ride height.
7. Remove and discard the lower arm outboard bolt.
^
To install, tighten to 275 Nm (203 ft. lbs.) at curb ride height.
8. Remove and discard the 3 wheel knuckle bolts.
^
To install, tighten to 275 Nm (203 ft. lbs.)
