mercury Workshop Repair Guides

Mercury Mountaineer 2WD V6-40L VIN K Service and Repair Manuals

Windshield Washer Reservoir|Service and Repair|Page 10427 > < Windshield Washer Pump|Service and Repair
Page 1
background image

Windshield Washer Reservoir: Service and Repair

WASHER RESERVOIR

Removal and Installation

WARNING:  Windshield washer solution contains methanol, which is poisonous. Observe all cautions and warnings indicated on the label of
the container. Failure to follow these instructions could result in personal injury.

CAUTION:

-

When servicing the windshield washer pump, be careful not to damage the windshield washer pump seal.

-

Do not operate the windshield washer pump before filling the windshield washer reservoir. Failure to do so could result in premature
pump failure.

1. Remove the air cleaner assembly.
2. Remove the RH front fender splash shield.

3. Disconnect the windshield washer pump electrical connector.

4. Disconnect the windshield washer solvent level electrical connector.

NOTE:  If necessary, drain the windshield washer reservoir after removal.

5. Disconnect the windshield washer reservoir hoses.

Windshield Washer Reservoir|Service and Repair|Page 10427 > < Windshield Washer Pump|Service and Repair