Mountaineer 2WD V6-4.0L VIN K Flex Fuel (2002)
Liftgate Window Glass: Service and Repair
Liftgate
LIFTGATE WINDOW GLASS
Removal and Installation
1. Open the liftgate window glass.
2. Disconnect and remove the two liftgate window glass struts.
3. Close the liftgate window glass, but do not allow the striker to engage into the latch.
4. Open the liftgate.
5. Position the upper part of the liftgate trim panel away from the liftgate.
6. Disconnect the liftgate window glass electrical connector and release the wiring harness retainer clip.
7. Remove both liftgate window glass hinge-to-body nuts.
8. Close the liftgate.
9. Remove the liftgate window glass.
10. To install, reverse the removal procedure.
-
If installing a new liftgate window glass, transfer the rear wiper motor with harness and the liftgate window glass hinges to the new liftgate
