Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
1. To install, reverse the removal procedure.
Cowl Side Trim Panel
Windshield and Molding/Trim Removal Kit Or Equivalent
Special Service Tool(s)
REMOVAL
NOTE: 4-door shown, 2-door similar.
1. Remove the front door scuff plate.
1
Starting at one end and working along the front door scuff plate, use Windshield and Molding/Trim Removal Kit to remove the front door
scuff plate.
2
Remove the front door scuff plate from the B-pillar.
2. Remove the cowl side trim panel by pulling outward to disengage the pin-type retainers.