Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
6. If equipped, remove the retractable cargo cover.
7. Remove the liftgate scuff plate.
1
Starting at either end and working along the liftgate scuff plate, use Windshield and Molding/Trim Removal Kit to remove the scuff plate.
2
Remove the liftgate scuff plate.
8. Fold the rear seat into the load floor position.
9. Using the special tool, remove the rear safety belt guide bolt.
-
Position the rear safety belt guide cover aside.
10. Using the special tool, remove the rear safety belt anchor bolt.
