Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
1. To install, reverse the removal procedure.
Trim Panel - Cowl Side
TRIM PANEL - COWL SIDE
Special Service Tool(s)
Special Service Tool(s)
Removal
NOTE: 4-door shown, 2-door similar.
1. Remove the front door scuff plate (13208).
1. Starting at one end and working along the front door scuff plate, use Windshield and Molding/Trim Removal Kit to remove the front door
scuff plate.
2. Remove the front door scuff plate from the B-pillar.
2. Remove the cowl side trim panel (02345) by pulling outward to disengage the pin-type retainers.