Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Seat Cushion: Service and Repair
60% Portion of Rear 60/40 Split Bench
DISASSEMBLY
1. Disassemble the 60 percent rear seat. For additional information, refer to Seat-Rear, 60% Portion of 60/40 Split Bench.
2. Remove the seat cushion legs.
1. Remove the pivot bolts.
2. Remove the seat cushion legs.
3. Remove the seat cushion frame from the seat cushion foam.
1. Unhook the seat cushion trim cover J-clips.
2. Remove the seat cushion frame from the seat cushion foam.
4. Invert the seat cushion trim cover.
5. Remove the seat cushion trim cover.
-
Separate the seat cushion trim cover from the hook and loop strip.
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip or the hook and loop strip may be torn from the
seat cushion foam.
