Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
CAUTION: Any time the seat cushion heating element is removed from the seat cushion foam, the foam must be replaced.
10. Remove the wire harness from the scat cushion frame.
ASSEMBLY
1. Install the wire harness.
2. If equipped, and if necessary, install the seat cushion heating element.
3. Position the seat cushion trim cover.
NOTE: When installing a new seat cushion trim cover, it may be necessary to cut a hole for the front seat back pad adjusting cable, backrest
heating element electrical lead, and the side air bag wiring harness. Use the old seat cushion trim cover as a guide for the location of the hole.