Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
2. Install the caliper pistons.
1
Install the piston seal.
2
Install the piston boot.
3
CAUTION: Be careful not to damage or dislodge the piston seal.
Insert the caliper piston.
4
Press the caliper piston into the caliper bore, being careful not to cock the caliper piston.
3. Install the disc brake caliper.
Brake Caliper Anchor Plate
Removal
1. NOTE: AWD and 4x4 shown, 4x2 similar.
Remove the pads.
2. Remove the front disc brake caliper anchor plate.
1
Remove the two front disc brake caliper anchor plate bolts.
2
Remove the front disc brake caliper anchor plate.
Installation
1. Install the front disc brake caliper anchor plate.
1
Position the front disc brake caliper anchor plate.
2
Install the front disc brake caliper anchor plate bolts.
2. Install the pads.