Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
8. Connect the RH parking brake rear cable and conduit to the parking brake cable bracket.
1
Install the RH parking brake rear cable and conduit to the parking brake cable bracket.
2
Push the RH parking brake rear cable and conduit into the parking brake cable bracket until the parking brake cable and conduit clip is seated.
9. Connect the RH parking brake rear cable and conduit to the LH parking brake rear cable and conduit at the parking brake cable equalizer.
10. Connect the parking brake intermediate cable to the LH parking brake rear cable and conduit.
11. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Install the front wheel and tire assemblies.
