Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Coolant Reservoir: Service and Repair
Removal
1. Remove the air cleaner outlet tube and the engine air cleaner (ACL).
2. Remove the bolt and position the speed control servo aside.
3. Disconnect the windshield washer hose from under the dash panel and plug the end of the hose.
4. Disconnect the windshield washer pump electrical connector from the windshield washer reservoir.
5. Position the (A) clamp back and disconnect the (B) radiator overflow hose from the (C) radiator filler neck and plug the hose.