Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Connecting Rod: Specifications
Connecting Rod Bearings
Clearance to crankshaft - desired
0.0008 - 0.0015 in
Clearance to crankshaft - allowable
0.0007 - 0.0024 in
Bearing wall thickness (STD)
0.0572 - 0.0577 in
Main Bearings
Clearance to crankshaft - desired
0.0008 - 0.00015 in
Clearance to Crankshaft - allowable 0.0008 - 0.003 in
Bearing wall thickness (STD)
0.0957 - 0.0960 in
Piston pin bore or bushing I.D.
0.909 - 0.911 in
Rod bearing bore I.D.
2.2390 - 2.2393 in
Rod bearing bore out-of-round
0.0004 in
Rod length center to center
5.0885 - 5.0915 in
Alignment (bore-to-bore max. Diff.) twist
0.015 in
Service limit
0.023 in
Alignment (bore-to-bore max. Miff.) bend
0.012 in
Side clearance (assembled to crank)
0.010 - 0.020 in
Connecting rod cap nuts
19-24 ft.lb
