Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
4. Pull the spring lock coupling fittings apart.
5. Remove the O-ring seals with a non-metallic tool.
-
There are three O-ring seals required for the A/C condenser core couplings.
-
There are two O-ring seals for all other refrigerant tube couplings.
CAUTION: Do not use metal tools to remove the O-ring seals. They can cause axial scratches across the O-ring seal grooves resulting in
refrigerant leaks.
6. Remove the A/C tube lock coupling spring with a small hooked wire.
CAUTION: Do not use a screwdriver or similar tool to remove the A/C tube lock coupling spring ; this can cause axial scratches across the
O-ring seal grooves resulting in refrigerant leaks.
CLEANING
1. Fabricate a cleaning tool from a 1/8 inch diameter brazing rod.