Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Compass: Adjustments
Calibration Adjustment
1. Start the vehicle.
NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential
electrical accessories (rear window defrost, heater A/C, map lamps, wipers, etc.) and make sure all doors are closed.
2. Locate the electronic compass/temperature display on the overhead console, press and hold the MODE button until CAL appears in the display,
then release the MODE button.
NOTE: To exit CAL mode before performing a compass adjustment, turn the ignition switch to the OFF position.
3. Drive the vehicle slowly (less than 5 km/h [3 mph]) in complete circles until CAL disappears from the display.
NOTE: If the CAL indicator does not turn off after the vehicle has been driven in a circle no more than five times, demagnetize the vehicle and
repeat the procedure.