Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Ignition Cable: Service Precautions
CAUTION:
^
The spark plug wires must be connected correctly. Mark the spark plug wires before removing them from the spark plugs.
^
It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wire.
^
Do not use special tool on spark plug wire boots with metal heat shields. Damage to the spark plug wire boots may occur.
^
Be sure to orient the spark plug boots so the spark plug wires do not contact the exhaust manifold.
