Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Ignition Cable: Service and Repair
Spark Plug Wire Remover
SPECIAL SERVICE TOOL(S)
REMOVAL
CAUTION:
^
The spark plug wires must be connected correctly. Mark the spark plug wires before removing them from the spark plugs.
^
It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wire.
^
Do not use special tool on spark plug wire boots with metal heat shields. Damage to the spark plug wire boots may occur.
1. Use the special tool to pull the spark plug wire off the spark plug with a twisting motion.
2. Squeeze the locking tab and twist while pulling upward to remove the spark plug wires from the ignition coils.
INSTALLATION