Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Digital Transmission Range Sensor: Service and Repair
Special Tools
1. Disconnect the battery ground cable.
2. Raise the vehicle on a hoist.
3. Disconnect the digital TR electrical connector.
4. CAUTION: Do not pry on the swivel tube to disconnect the transmission shift linkage.
Disconnect the manual lever shift control cable.
5. CAUTION: Discard outer manual control lever shaft nut. Do not reuse. The old nut will not retain torque specification.
Remove the manual control lever.
1. Remove the nut.
2. Remove the lever.
