mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

ABOUT US
Relays and Modules - A/T > < Diagram Information and Instructions|Page 5511

Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)

Page 4
background image

through the connector slots.

-

Connect the TCC by pressing it in place by hand and fully seating the connector in place. Make sure that the terminals pass fully through the
connector slots.

-

Connect the shift solenoid SSA and SSB by pressing it in place by hand and fully seating the connector in place. Make sure that the terminals
pass fully through the connector slots.

4. Install the manual control lever.

Relays and Modules - A/T > < Diagram Information and Instructions|Page 5511