Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Use the pry bar and the wood block to remove the differential case from the rear axle housing.
7. Remove the 10 ring gear bolts.
8. CAUTION: Care should be taken not to damage the ring bolt hole threads.
CAUTION: The anti-lock speed sensor ring cannot be reused once removed.
Insert a punch in the bolt holes and drive off the ring gear and, if necessary, the anti-lock speed sensor ring.
9. Install the differential case.
-
Position the differential case assembly, including the bearing cups and shims, in the rear axle housing. Install the differential bearing caps and
the differential bearing cap bolts.