Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
7. Note: Always disconnect the front driveshaft from the transfer case first.
Remove the front driveshaft.
Installation
1. Note: Install new front driveshaft CV joint-to-transfer case bolts and washers and new front driveshaft-to-front axle bolts and straps. If new bolts
are not available, coat the threads of the original bolts with Threadlock and Sealer EOAZ-19554-AA or equivalent meeting Ford specification
WSK-M2G351-A5.
Note: Always install the front driveshaft at the front axle first.
To install, follow the removal procedure in reverse order.
