Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
2. Remove the rear driveshaft.
8. Use the (A) Hi-Lift Jack to support the (B) transmission.
-
Secure the (B) transmission with the (C) strap.
9. Remove the nuts.
10. Remove the crossmember.
1. Remove the six bolts (three each side).
2. Remove the crossmember.
11. Remove the (RH) transmission mount bolt.
1. Remove the bolt.
2. Reposition the exhaust mounting bracket.
12. Lower the transmission to access extension housing bolts.
