Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
INSTALLATION
1. Install the RH and LH mounting arms and pivot shafts.
1
Position the mounting arm and pivot shafts into place.
2
Install the two nuts.
2. Install the clip onto the RH mounting arm and pivot shaft.
CAUTION: To avoid possible damage to the windshield wiper adapter and connecting arm clip, be sure the clip is fully seated before installing
the adapter and connecting arm clip on the windshield wiper motor crank pin.
3. Install the LH windshield wiper mounting arm and pivot shaft onto the windshield wiper motor crank pin, and install the RH windshield wiper
mounting arm and pivot shaft onto the wiper motor crank pin.
4. Install the cowl top vent panels.