Mountaineer 2WD V8-4.6L (2010)
Trunk / Liftgate Latch: Service and Repair
Liftgate Window Latch
Liftgate Window Latch
Removal and Installation
1. Remove the liftgate trim panel.
2. Position the water shield aside.
3. Disconnect the liftgate window actuator and liftgate window ajar switch electrical connectors.
4. Remove the 4 screws and the liftgate window latch.
-
To install, tighten to 12 Nm (106 lb-in).
5. To install, reverse the removal procedure.