Mountaineer 2WD V8-4.6L (2010)
Disassembly and Assembly
1. Remove the second row 40 percent seat of the 60/40 bench seat. For additional information, refer to Seat - Second Row, Sport Trac or Seat -
Second Row, Explorer, 60/40 Bench .
2. Remove the second row, 40 percent bench seat backrest. For additional information, refer to Seat Backrest - Second Row, 40 Percent, Bench See:
Seat Back/Service and Repair/Removal and Replacement/Rear Seat/Seat Backrest - Second Row, 40 Percent, Bench.
3. NOTICE: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the
seat cushion foam pad.
Release the J-clips, separate the hook-and-loop fasteners and remove the seat cushion trim cover.
4. Remove the cushion foam pad.
5. Remove the cushion pad supports.
6. To assemble, reverse the disassembly procedure.
Seat Cushion - Second Row, 60 Percent, Bench
Seat Cushion - Second Row, 60 Percent, Bench