Mountaineer 2WD V8-4.6L (2010)
Truck Bed Storage Compartment Latch: Service and Repair
Pickup Bed Storage Compartment Latch
Removal and Installation
1. Remove the 3 pickup bed storage compartment latch bolts.
-
To install, tighten to 12 Nm (106 lb-in).
2. NOTICE: Do not allow the pickup bed storage compartment lid to close until the latch has been connected to the cable. If the lid is closed
prior to attaching the cable to the latch, releasing the latch is extremely difficult.
Disconnect the pickup bed storage compartment release cable from the pickup bed storage compartment latch.
3. Remove the pickup bed storage compartment latch.
4. To install, reverse the removal procedures.
