Mountaineer 2WD V8-4.6L (2010)
Camshaft - LH
Camshaft - LH
Removal
NOTICE: The camshaft procedure must be followed exactly or damage to the valves and pistons will result.
1. Remove the LH valve cover. For additional information, refer to Valve Cover - LH See: Cylinder Head Assembly/Valve Cover/Service and
Repair/Valve Cover - LH.
2. NOTICE: Damage to the camshaft phaser and sprocket assembly will occur if mishandled or used as a lifting or leveraging device.
Loosen and back off the LH camshaft phaser and sprocket bolt one full turn.
3. Disconnect the LH Camshaft Position (CMP) sensor electrical connector.