Mountaineer 2WD V8-4.6L (2010)
Camshaft - RH
Removal
NOTICE: The camshaft procedure must be followed exactly or damage to the valves and pistons will result.
1. Remove the RH valve cover. For additional information, refer to Valve Cover - RH See: Cylinder Head Assembly/Valve Cover/Service and
Repair/Valve Cover - RH.
2. NOTICE: Damage to the camshaft phaser and sprocket assembly will occur if mishandled or used as a lifting or leveraging device.
Loosen and backoff the RH camshaft phaser and sprocket bolt one full turn.
3. Disconnect the RH Camshaft Position (CMP) sensor electrical connector.
4. Remove the bolt and the RH CMP sensor.
