Mountaineer 2WD V8-4.6L (2010)
1. Install a new gasket onto the VCT housing.
RH VCT housing
2. Position the RH VCT housing and install the 2 bolts.
-
Tighten to 10 Nm (89 lb-in).
LH VCT housing
3. Position the LH VCT housing and install the 2 bolts.
-
Tighten to 10 Nm (89 lb-in).
All VCT housings
4. Install the timing drive components. For additional information, refer to Timing Drive Components See: Service and Repair/Removal and
Replacement.
