Mountaineer 2WD V8-4.6L (2010)
Exhaust Manifold: Specifications
Install 8 new LH exhaust manifold studs.
Tighten to....................................................................................................................................................................................................12 Nm (106 lb-in).
Tighten the exhaust manifold nuts in the sequence shown.
Tighten to.......................................................................................................................................................................................................25 Nm (18 lb-ft).
Install the heat shield and the 3 bolts.
Tighten to......................................................................................................................................................................................................10 Nm (89 lb-in).
Install 8 new RH exhaust manifold studs.
Tighten to....................................................................................................................................................................................................12 Nm (106 lb-in).
Tighten the nuts in the sequence shown.
Tighten to.......................................................................................................................................................................................................25 Nm (18 lb-ft).
Position the heat shield and install the 3 bolts.
Tighten to......................................................................................................................................................................................................10 Nm (89 lb-in).
