Mountaineer 2WD V8-4.6L (2010)
Control Assembly: Service and Repair
Heating Ventilation Air Conditioning (HVAC) Module
Heating Ventilation Air Conditioning (HVAC) Module
Removal and Installation
NOTE: If installing a new HVAC module, the new module must be configured for the vehicle. For additional information, refer to Information Bus.
1. Remove the center instrument panel finish panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
2. Remove the 4 HVAC module screws.
3. Remove the HVAC module.
4. To install, reverse the removal procedure.
