mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Oil Change Reminder Lamp|Description and Operation|Page 1571 > < Malfunction Indicator Lamp|Description and Operation
Page 1
background image

Oil Change Reminder Lamp: Description and Operation

Oil Life and Oil Life Start Value

The oil life is displayed in percentages and is preset to a maximum of approximately 12,000 km (7,500 miles) or 180 days. The oil life start value is used
to increase or decrease the starting point of the oil life. The value can be changed back to the maximum of approximately 12,000 km (7,500 miles) if the
value was previously changed or to lower the value by 10% increments down to 30%. Each 10% reduction lowers the oil life in both mileage and the
days.

For example, if the oil life start value is lowered to 50%, the maximum mileage is 6,000 km (3,750 miles) or 90 days. The oil life remains at the selected
setting (50% in this example) until the driver changes the oil life start value. When the oil life (not oil life start value) is reset back to 100% following
an oil change, the oil life resets to 6,000 km (3,750 miles). For configuration of the oil life and oil life start value, refer to Message Center Configuration 
See: Accessories and Optional Equipment/Driver/Vehicle Information Display/Service and Repair/Reset Procedure.

Oil Change Reminder Lamp|Description and Operation|Page 1571 > < Malfunction Indicator Lamp|Description and Operation