Mountaineer 2WD V8-4.6L (2010)
Wheel Fastener: Service and Repair
Front Suspension
Wheel Studs
Removal
1. Remove the wheel and tire. For additional information, refer to Wheels and Tires.
2. NOTICE: Do not allow the caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.
Remove the bolts and position the caliper, pads and anchor plate assembly aside.
-
Discard the bolts.
-
Support the caliper and anchor plate assembly using mechanic's wire.
-
To install, tighten the new bolts to 165 Nm (122 lb-ft).
3. Remove the brake disc.
4. Using the C-Frame and Screw, remove the wheel stud.
