Mountaineer 2WD V8-4.6L (2010)
5. Subtract measurement 3 from measurement 2 to obtain the front ride height.
-
Refer to Specifications.
Rear Ride Height Measurement
NOTE: Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full tank
of fuel.
1. Measure the distance between the flat level surface and the center of the lower arm inboard bolt (measurement 2).
2. Measure the distance between the flat level surface and the center of the shock absorber lower bolt (measurement 3).
3. Subtract measurement 3 from measurement 2 to obtain the rear ride height.
-
Refer to Specifications.
