Mountaineer 2WD V8-4.6L (2010)
5. Install the transmission fluid cooler tube bracket-to-engine nut.
-
Tighten to 25 Nm (18 lb-ft).
6. Connect the transmission fluid cooler tube to the transmission fluid cooler hose.
7. Install the transmission fluid cooler tube secondary latch to the transmission fluid cooler tube at the transmission fluid cooler hose.
8. Install the transmission fluid cooler tube to the radiator.
9. Install the transmission fluid cooler tube secondary latch to the transmission fluid cooler tube at the radiator.
10. Fill the transmission to the correct fluid level using clean transmission fluid and inspect for leaks. For additional information, refer to Transmission
Fluid Level Check in Automatic Transmission/Transaxle &/or Transmission Control Systems.
Transmission Fluid Cooler Tubes - 6R80