Mountaineer 2WD V8-4.6L (2010)
Installation
RWD vehicles
1. Install the transmission insulator and retainer and the 3 bolts.
-
Tighten to 90 Nm (66 lb-ft).
2. Install the 2 transmission insulator and retainer nuts.
-
Tighten to 90 Nm (66 lb-ft).
4WD vehicles
3. NOTE: Right side shown, left side similar.
Install the transmission insulator and retainer and the 2 bolts.
-
Tighten to 90 Nm (66 lb-ft).
4. Position the transmission crossmember and loosely install the 2 transmission insulator and retainer nuts.
