Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
Part 2
1. Remove the components in the order indicated in the illustration and table. To remove individual components, only carry out the listed steps.
Item 6: Cowl Side Trim Panel Removal Note
1. To remove the LH cowl side trim panel, remove the hood release lever.
1
Remove the screw.
2
Remove the hood release lever.
2. Remove the lower cowl trim panel.
1
Remove the pin-type retainer.
2
Remove the lower cowl trim panel.
Item 13: D-Pillar Lower Safety Belt Anchor Bolt Removal Note
1. If equipped with third-row seating, release the two levers located at each lower outboard edge of the third row seat cushion to access the D-pillar