Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
1. Release the seat backrest J-clip.
2. Remove all the staples in the backrest support panel.
3. Invert the seat backrest trim cover and foam pad to access the latch cover screws.
4. Remove the two screws and the cover (outboard side shown, inboard side similar). Detach the seat backrest material attachment from the latch
cover.
Item 5: Rear Seat 40 Percent of 60/40 Upper Pivot Latch Bolt Disassembly Note
