Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
Part 1 Of 2
Part 2 Of 2
6. To install, reverse the removal procedure.
7. Install the spark plugs.
^
Tighten to 18 Nm (13 ft. lbs.).
8. Install the cooling fan.
9. Install the valve covers.
Item 1: Camshaft Roller Followers Removal Note
1. Disconnect the electrical connectors, remove the bolts, and the LH and RH ignition coils.
^
Tilt the coils away from the fuel injection supply manifold to remove.