Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
1. Remove the brake booster vacuum tube retaining bolt and disconnect the vacuum tube.
Items 7 and 8: Throttle Cable Assembly and Speed Control Cable Removal Note
1. Disconnect the accelerator cable, the speed control cable and the return spring from the throttle body and the bracket, and position the cables
aside.
Item 12: Engine Wiring Harness Removal Note
1. Disconnect the fuel rail ground wire.
2. Disconnect the Idle Air Control (IAC) and the Throttle Position (TP) sensor electrical connectors.