Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
1. Tighten the bolts in the sequence shown to 10 Nm (89 inch lbs.).
Item 5: Crankshaft Rear Oil Seal Installation Note
1. Using the special tools, install the crankshaft rear oil seal.
^
Lubricate the crankshaft rear oil seal with engine oil before installation.
Item 4: Crankshaft Rear Oil Slinger Installation Note
1. Using the special tools, install the crankshaft rear oil slinger.
Item 1: Flexplate or Flywheel Bolts Installation Note
1. Position the flexplate and install the bolts loosely.
^
Tighten the bolts in the sequence shown.
