Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
6. Position the LH (inner) timing chain on the crankshaft sprocket, aligning the copper (marked) link with the timing mark on the sprocket.
7. NOTE: If necessary, adjust the camshaft sprocket slightly to obtain timing mark alignment.
Position the LH timing chain on the camshaft sprocket. Make sure the copper - colored link aligns with the camshaft sprocket timing mark.
8. Compress the LH tensioner plunger, using a vise.
9. Install a retaining clip on the LH tensioner to hold the plunger in during installation.
