Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
Transmission Position Switch/Sensor: Service and Repair
Digital Transmission Range (TR) Sensor
Special Tools
Special Tool(s)
1. On 4x4 vehicles, remove the front driveshaft.
2. On 4x2 vehicles, with the vehicle in NEUTRAL, position on a hoist.
3. It is not necessary to remove the shift cable and bracket from the transmission.
4. Remove the components in the order indicated in the illustration and table.
5. To install, reverse the removal procedure
6. Refill the transmission with the specified fluid.
7. Verify that the shift cable is adjusted correctly.
Item 1: TR Sensor Electrical Connector Removal Note