mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Engine Controls/Emissions - Exhaust Sulfur Smell|Page 4476 > < Engine Controls/Emissions - Exhaust Sulfur Smell|Page 4474
Page 3
background image

NOTE

CONVERTER REPLACEMENT OR RECALIBRATION IS NOT NECESSARY.

2001-2002 2 DOOR EXPLORER SPORT 4.0L

7/24/00 Through 3/4/02 With 5R55E Transmission

1.

Refer to 2001/2002 Explorer Sport/Sport Trac Workshop Manual, Section 309-00. Remove the old catalytic converter and install the revised
converter 2L2Z-5E212-DA.

2.

Verify that WDS is at the latest level, B21.0 or higher.

3.

Reprogram the PCM with the latest calibration only.

4.

See Contributing Factors Heading for additional information.

NOTE

DO NOT REPLACE CONVERTER MORE THAN ONCE.

2002 2 DOOR EXPLORER SPORT/SPORT TRAC

4.0L

Vehicles Built After 3/27/02

At latest level for engine calibration and converter, no service action will improve the situation.

1.

See Contributing Factors Heading for additional information.

3/4/02 Through 3/27/02

1.

Refer to 2002 Explorer Sport/Sport Trac Workshop Manual, Section 309-00. Remove the old catalytic converter and install the revised converter
2L2Z-5E212-AB only.

2.

See Contributing Factors Heading for additional information.

NOTE

DO NOT REPLACE CONVERTER MORE THAN ONCE OR RECALIBRATE.

2002 2 DOOR EXPLORER SPORT/SPORT TRAC

4.0L M5R4 MANUAL TRANSMISSION

11/2/01 Through 3/4/02 With Manual Transmission

1.

Refer to 2002 Explorer Sport/Sport Trac Workshop Manual, Section 309-00. Remove the old catalytic converter and install the revised converter
2L2Z-5E212-DA only.

2.

See Contributing Factors Heading for additional information.

NOTE

DO NOT REPLACE CONVERTER MORE THAN ONCE OR RECALIBRATE.

2002 SPORT TRAC 4.0L 5R55E TRANSMISSION

11/2/01 Through 3/4/02 With 5R55E Transmission

1.

Refer to 2002 Explorer Sport/Sport Trac Workshop Manual, Section 309-00. Remove the old catalytic converter and install the revised converter
2L2Z-5E212-DA.

2.

Verify that WDS is at the latest level, B21.0 or higher.

3.

Reprogram the PCM with the latest calibration.

4.

See Contributing Factors Heading for additional information.

Engine Controls/Emissions - Exhaust Sulfur Smell|Page 4476 > < Engine Controls/Emissions - Exhaust Sulfur Smell|Page 4474