mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

General Procedure|Page 8142 > < General Procedure|Page 8140
Page 2
background image

striking components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood latches.

The side impact sensors (if equipped) are located at or near the base of the B-pillars and C-pillars.

To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary
batteries and power supplies (if equipped).

Disconnect the battery ground cable and wait at least one minute.

2. WARNING:  To reduce the risk of serious personal injury, read and follow all warnings, notes, and instructions in the supplemental

restraint system (SRS) deactivation/reactivation procedure.

Deactivate the supplemental restraint system (SRS).

3. Remove the floor console.

4. Remove the components in the order indicated in the illustration and table.

Item 1: Large Electrical Connector Removal Note

General Procedure|Page 8142 > < General Procedure|Page 8140