Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
Part 2
4. Remove the components in the order indicated in the illustration and table. To remove individual components, only carry out the listed steps.
Item 2: Upper B-Pillar Trim Panel Removal Note
1. Remove the front and rear door opening weatherstrips along the entire length of the trim panel.
Item 5: Safety Belt Shoulder Height Adjuster Removal Note
1. Remove the safety belt shoulder height adjuster.
1
Rotate the safety belt shoulder height adjuster downward to release the lower tab.
2
Remove the safety belt shoulder height adjuster.
INSTALLATION
1. To install reverse the removal procedure.