Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
2. Remove the components in the order indicated in the following illustration and table.
3. To install, reverse the removal procedure.
4. Fill, purge and leak test the system.
Item 17: Pulley Removal Note
1. Using the special tool, remove the pulley.
Item 21: Pump Bolts Removal Note
1. Remove the nuts and position the bracket and cable aside.
^
Remove the pump bolts.
Item 21: Pump Bolts Installation Note
1. Make sure to align the bracket and pump before tightening the bolts.