Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
damage will occur if the wheel bearing is unloaded with the weight of the vehicle applied.
With the vehicle in NEUTRAL, position on a hoist.
2. Remove the rear wheel and tire assembly.
3. Remove the components in the order indicated in the illustration and table.
4. To install, reverse the removal procedure.
5. Fill the axle with the specified quantity of the specified lubricant.
Item 1: Rear Disc Brake Caliper Removal Note
1. CAUTION: Do not allow the caliper to hang from the brake hose. Provide a suitable support.
Position the rear disc brake caliper aside.
