mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Windshield > < Body - Rear Door Window Stuck In Up Position/Inoperative|Page 10843
Page 4
background image

1. Remove the applique on the rear door.

-

Remove the screws.

2. Pull the glass out through the top inboard side of the door.

Item 10: Window Regulator Motor Removal Note.

1. Before removing the window regulator motor, secure the glass in the full up position with tape.

Item 12: Rear Door Window Glass Top Run Removal Note

1. Remove the glass top run through the top opening of rear door.

INSTALLATION

1. To install, reverse the removal procedure.

Windshield > < Body - Rear Door Window Stuck In Up Position/Inoperative|Page 10843