Mountaineer 2WD V8-4.6L VIN 8 (2006)
Antenna Cable: Service and Repair
Antenna Cable - Satellite Radio
ANTENNA CABLE - SATELLITE RADIO
Removal and Installation
Both cables
1. Lower the glove compartment.
-
Open the glove compartment door.
-
Press the tabs inward and lower the glove compartment.
2. Disconnect the upper-to-lower satellite radio antenna cable connection.
Upper satellite radio antenna cable
3. Remove the RH A-pillar trim panel.
4. Remove the upper satellite radio antenna cable.
-
Disconnect the upper satellite radio antenna cable to the satellite antenna electrical connection.
-
Separate the pin-type retainers from the A-pillar and instrument panel.
Lower satellite radio antenna cable
5. Remove the audio unit.
6. Remove the lower satellite radio antenna cable.
-
Disconnect the electrical connector.
-
Separate the pin-type retainers from the instrument panel.
Both cables
7. To install, reverse the removal procedure.
